6. Slide and hold the battery release latch (1) to disengage the battery
pack and then remove it from the computer (2).
To install a battery, follow the steps as detailed below:
1. Insert the battery pack as far as it will go into the computer (1).
2. Ensure that the battery pack is securely in place and the battery safety
lock (2) is in its position.
3. Turn your computer over.
User's Manual
2
Figure 6-2 Releasing the battery pack (2)
2
Figure 6-3 Securing the battery pack
Power and Power-up Modes
1
1
6-10