Real Time Clock; Keyboard - Toshiba Satellite P500 User Manual

■
Reformatting the media
■
Reinstalling an operating system from the recovery CD-ROM
The procedures above delete only the initial part of the data used for file
management. This makes the file invisible to the operating system, but
the data can still be read by specialized utilities. If you dispose of the
PC, please delete all the data on its hard disk drive. Doing so prevents
unauthorized use of such data. To ensure your data is not used for
unauthorized purposes, you can:
■
Physically destroy the hard disk drive
■
Use a proven specialized utility to overwrite all data
■
Take the hard disk drive to a professional deletion service

Real Time Clock

Problem
The BIOS setting and
system date/time are
lost.
After configuring the time and date for the Real Time Clock battery, we
recommend that you turn the power status of your computer to "ON" so
that the Real Time Clock battery is charged.

Keyboard

Keyboard problems can be caused by your setup configuration. For more
information, refer to Chapter 5,
Problem
Output to screen is
garbled
User's Manual
Procedure
Charge in the RTC battery is exhausted or
getting low. You will need to set the date and time
in the BIOS setup screen using the following
procedure
1. Press F2 key. BIOS setup will boot up.
2. Set the date in System Date.
3. Set the time in System Time.
4. Press F10 key. Confirmation message will
appear.
5. Press Enter key. BIOS setup will terminate
and the computer will be rebooted.
The Keyboard.
Procedure
Make sure the software you are using is not
remapping the keyboard. Remapping involves
reassigning the meaning of each key. Refer to
your software's documentation.
If you are still unable to use the keyboard,
consult your dealer.
Troubleshooting
9-7