The Grand Tour
Installing the batteries
1. Open the battery cover on the back side of the remote controller.
1. Battery Cover
2. Be sure to place the batteries with correct polarities. Press the battery
down to the stopper then push it forward to fit into the battery case.
1. Stopper
2. Battery
3. Close the battery cover. Press gently until it clicks into place.
Replacing the batteries
When the batteries in the remote controller reach the end of their life, the
remote controller may not operate correctly or work only within a short
distance from your computer. In this instance, you should purchase new
batteries and replace the discharged ones.
2-24
1
Opening the battery cover
1
2
Inserting the batteries
Closing the battery cover
User's Manual