How To Make A Dvd-Video; How To Learn More About Corel Moviefactory; Important Information For Use - Toshiba Satellite P500 User Manual

How to make a DVD-Video

Simplified steps for making a DVD-Video from adding video source:
1. Click Start
DVD MovieFactory Launcher to launch DVD MovieFactory.
2. Click Create Video Disc
3. Choose your project type, then invoke MovieFactory.
4. Click Add video files to select the source video from the hard disk. The
browser dialog box is displayed.
5. Choose the source video and click Next.
6. Choose the menu template and press Next.
7. Choose the output type and press Burn.

How to learn more about Corel MovieFactory

Please refer to the Help and Manual files for additional Corel MovieFactory
information.

Important information for use

Note the following limitations and precautions when you write Video DVD:
1. Editing digital video
■
■
■
■
■
■
■
■
■
■
■
■
User's Manual
All Programs
Log on with Administrator rights to use MovieFactory.
Make sure that your computer is running on AC power when using
MovieFactory.
Operate the computer at Full Power. Do not use power-saving
features.
While you are editing DVD, you can display preview. However, if
another application is running, the preview might not display
properly.
MovieFactory cannot edit or play copy protected content.
Do not enter sleep or hibernation mode while using MovieFactory.
Do not operate MovieFactory immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
When recording to a DV-Camcorder, to ensure you capture all of
your data, let the camcorder record for a few seconds before you
begin recording your actual data.
CD recorder, DVD-Audio, mini DVD and Video CD functions are not
supported in this version.
While recording video to DVD, please close all other programs.
Do not run software like a screen saver because it can put a heavy
load on the CPU.
Mp3 decoding and encoding are not supported.
DVD MovieFactory for TOSHIBA
New Project to invoke 2nd Launcher.
Operating Basics
4-31