Step 6: Modify Tsp Configuration; Step 7: Run The Ctx Attendant Console - Toshiba STRATA CTX Installation Manual

Step 6: Modify TSP Configuration

1. Modify the TSP configuration data to fit with your environment (the default appears). You can
do this step later when the Attendant Console starts up and or via the short cut by selecting Start
> Programs > Strata CTX Attendant > Strata CTX Attendant Console TSP Config Utility (see
below).
• Switch IP: This number should match the
Strata CTX IP address (displayed when you
log into CTX WinAdmin).
• Port: This number must match the Port
number entered earlier in Strata CTX
Program 801, (see
on page 7).
• CommunityName: This should match the
Strata CTX CommunityName (displayed
when you log into CTX WinAdmin).
• Attendant DN: This should be the Prime
DN for the Attendant Console, entered in
Strata CTX Program 200 (see
2B: Make Station Assignments on CTX"
on page 4).
2. Click OK.

Step 7: Run the CTX Attendant Console

1. Double-click on the "Strata CTX Attendant Console" desktop icon
...or click Start > Programs > Strata CTX Attendant > Strata CTX Attendant Console (see
below). The application should start in a few seconds.
Strata CTX Attendant Console Installation 03/03
"Step 2F: Set Up LAN"
"Step
6602
6603
13