Connectors And Controls - TerraTec AXON AIX 101 Manual

Connectors and controls

1. Pickup: this component converts the vibrations of the strings into an electrical signal
that is processed by the AIX 101/103 and sent to the AXON.
CAUTION: due to its extremely flat design, the pickup is delicate and can easily be
damaged by strong pressure, bending or twisting. Please handle the pickup with great
care.
2. Connector socket for the 13-pin cable (AXON AXK 100): this is the signal output of
the AIX 101/103. Use the 13-pin cable to connect this socket to the INPUT socket on
the AXON. The cable carries the signals of the individual strings from the AIX 101/103
pickup as well as the signal from the conventional instrument output. The cable also
carries power for the AIX 101/103, as well as the control signals generated by the
UP/DOWN buttons and the volume control on the AIX 101/103.
3. Guitar/bass input socket: the AIX101/103 receives the signal from the conventional
pickups of the instrument via this socket. Use the short cable supplied with the AIX
101/103 to connect this socket to the 1/4" output socket of the instrument.
4. Operation LED: this LED indicates that the AIX 101/103 is receiving power from the
AXON via the 13-pin cable.
8 AXON AIX 101/103 (English)