The Digital Menu - TerraTec SiXPack 5.1+ Manual

The Digital Menu.

In the digital menu you can set the parameters for the digital In and Out.
To be able to work with the digital input, you should first ensure that this has also been acti-
vated. In the field "Digital Input" choose either:
"Always on" – in this case, the digital input is always active, regardless of whether or not a
signal is actually present or
"Automatic sensing" – the signal input is only activated when data is actually present.
The boxes "Sample rate", "Copyright" and "Pre-emphasis" show the current status of the digital
input.
For the digital Out there are three modes to chose from.
·
Digital In Source Direct – permits you to forward 1:1 data present at the digital input to the
digital output, i.e. in this mode, the frequencies 32 kHz and 44.1 kHz are also output at the
digital output. It is not possible to adjust the volume.
·
Digital Mix / DVD – with this setting all the digital sources (Wave, MIDI, Digital In) are
played over the digital output at 48kHz. This setting is also used when you want to send
encoded AC3 streams to an external decoder– please pay attention that the DVD software
documentation should clearly state its compatibility to the SiXPack 5.1 +: either explicitly as
"SiXPack 5.1 +", as "Crystal Soundfusion" or also as "CS4624 / CS4630".
54 SoundSystem SiXPack 5.1 +