The Microphone Input.
The MIC In is for connecting a normal condensor Mic (with or without a
battery). The input capacity is approximately 0.1V
The Basics.
Microphone recordings, for example for voice recognition or Internet telephony, can be made
through the port marked Mic In on your SoundSystem SiXPack 5.1 +. Use a standard condensor
microphone or headset with a mono mini-jack (3,5 mm mini-jack).
The sensitivity can be regulated in the Control Panel of the SiXPack 5.1 +.A switch for the Mic
input amplifier is also included. The button marked "Boost" strengthens the input signal by
about +20dB, but of course also raises the background noise level as well.
Safety Instructions
When using the microphone, unpleasant feedback can occur suddenly
(loud whistling) which can be bad for your speakers as well as your
hearing. Always reduce the volume when first using a microphone and
increase the volume carefully if necessary.
SoundSystem SiXPack 5.1 +
.
RMS
Mic In
!
37