Installation - TerraTec EWS88 MT Manual

Installation.

Tip! Even as a professional you should at least read "Software" from
page 47 onwards. The information with regards to the drivers and the
ControlPanel is essential in the understanding of the system.
Thank you.
A quick summary for all quick-starters:
Both EWS88 D and MT are PCI cards (as you have probably noticed). They should be
installed as far away as possible from graphics cards or SCSI controllers.
The 88AX module (only supplied with the MT version and only to be used with this) can
also be mounted externally. Both connection cables cannot be plugged in the wrong way
around.
Before installing multiple EWS88 (whether MT or D, or mixed), each of the cards must be
defined as MASTER or SLAVE through the cards' software. Read Page 44 to find out more.
You will require 1 IRQ. If you wish to install multiple EWS88, you can do this – the cards
operate on a IRQ-Sharing-system.
You will need a few free addresses (usually not a problem).
Driver installation follows the usual standard, all drivers are supplied on the CD ROM.
After installing the drivers, check the Device Manager and look out for any exclamation
marks. If you see them, you have a problem. Possible solutions are listed in the FAQ to be
found on CD.
Having installed the drivers, the software installation will start automatically. It is essential
to install the ControlPanel.
This concludes the quick-start manual. A detailed description with diagrams and pictures of
the installation process follows next.
AudioSystem EWS88
!
9