Synchronization; General; Multiple-Card Configuration - TerraTec EWS88 MT Manual

Hide thumbs Also See for EWS88 MT:

Table of Contents

Synchronization

Up to 4 EWS 88 can be installed in one PC and operated simul-

taneously. A custom made cable is supplied for connecting the cards

to ensure seamless integration. Alternatively, you could use the

optional EWS

ClockWork.

The Audio Systems EWS88 MT and EWS88 D are equipped with our EWS

allows for perfect synchronization of multiple EWS88-systems in one PC. Only this type of

interconnection guarantees perfect sync between the cards.

The EWS

-Connect will also be used to connect the optional TerraTec EWS

has the ability to synchronize external digital equipment.

When you are the proud owner of multiple EWS88 systems (remember: up to 4 cards can be

installed in one PC simultaneously!) one of the cards needs to be assigned the master role.

After installing the EWS software, you will be greeted with the message "Multiple Card

Configuration" in the EWS start-up menu. Here's your chance to define the cards as "master"

or "slave". We recommend to define the one card, which is to be used for external

synchronization (ADAT or S/PDIF) as the "master", in which case the entire system will be

synchronized to the external source (i.e. digital mixer or DAT). In principle, however, it is

entirely up to you to choose the "master".

Only run "Multiple Card Configuration" when there is only one card

installed.

If you own only one EWS88 , these setting have no effect at all. For ease of use, as well as later

expansion, the card should be defined as "slave" (factory pre-set).

-Connect, which

ClockWork. It even

AudioSystem EWS88

Table of Contents

Show Quick Links

Table of Contents

Ews88 d