Settings In Controlpanel - TerraTec EWS88 MT Manual

Please Note: The EWS88 D hardware-revision 1.0 has a differing header inscription. Here CN2
is the 5 pin header (Sync-In) and CN1 is the 3 pin header (Sync-Out). Since the EWS88 D
hardware revision 1.1 you will find the same EWSâ-Connect inscription adapted to the EWS88
MT.

Settings in ControlPanel...

Even though all cards are interconnected via the EWS
with different sample rates. You can choose the settings for "independent" or a synchronized
"Master/Slave" in the Setting-Page
46
Setting-Page of the ControlPanel. Setting-Page Setting-Page
As all the cards are digitally synchronized, all slave cards are
switched to external synchronization automatically when Master-
/Slave-Mode is chosen. The clock in the first ("Master") clock is set
to "internal" (You can chose the cards in the "Select" box on the
right of the ControlPanel).
All cards are now running in parallel to the master-card. Should you
want to run the master-card from an external clock (i.e. from a DAT-
recorder), you need to set its clock to "External". The sync-code will
be passed on to all other EWS88s.
®
-Connect, You can still run the cards
AudioSystem EWS88