Midi Mapping - TC Electronic G-Major User Manual

MIDI MAPPING

What is MIDI mapping?
With the G•Major it is possible to map an
incoming program change from 1 to 128 to
recall any Factory or User preset.
Example:
You send program change no. 1 to both your
G•Major and you MIDI preamp (or other MIDI
device). However, you would like the G•Major
to recall another preset instead of no. 1.
MIDI mapping can do this for you. See below.
To enter the MIDI mapping functions:
• Press MIDI/UTIL
• Select Prg Bank parameter and set to
"Custom" using the PARAMETER and EDIT
wheel
• Press ENTER
The display now reads:
• Select which incoming program change you
wish to map using the EDIT wheel.
• Now select "Map To" using the PARAMETER
wheel
• Use the EDIT wheel to select which preset to
map to. In the above example a received
program change no. 1 will be mapped to
Factory preset number 7.
• Repeat for all the programs you wish to map.
The User bank is located after the
Factory Bank.
You can chose to map to "none" if you
wish to let the G•Major ignore the
incoming program change.
18
MIDI/UTIL
Reset MIDI Map
By resetting the MIDI map incoming program
changes will be mapped 1 to 1 factory bank,
2 to 2 factory bank and so forth.
• Select "Reset Map" using the PARAMETER
wheel.
• Press ENTER to reset the entire MIDI Map.