Connecting; Usb - TC Electronic CORONA CHORUS User Manual

Connecting

Input jacks - Use MONO for mono input and both MONO
and STEREO if connecting a stereo source.
If you run the pedal on battery, we recommend removing
the mono input jack to preserve battery power when you
don't play.
Output jacks – Connect to another pedal or directly into
an amp or mixer. Use MONO for mono setups and both
MONO and STEREO for stereo setups.
Notice that it is possible to select between true bypass and
buffered bypass mode via a dip switch located under the
battery cover.
Power in – Use a 9 VDC power supply with the following
symbol:

USB

Connect to a computer using the supplied USB cable for
upload of TonePrint patches.
The connector-type is Mini-B.
8