Using the low-cut filter
The low cut filter can reduce noise such as offensive wind noise from
air-conditioners and projectors.
1.
Press the MENU button to open the
2.
Turn the DATA dial to select
DATA dial or / button to open the
3.
Turn the DATA dial to select
the
dial or / button.
DATA
Ch1 INPUT SETTING screen
4.
Turn the DATA dial to select the cut off frequency of the low cut
filter for mic input.
Options:
(default value),
OFF
5.
When finished making the setting, press the stop (8) [HOME]
button to return to the Home Screen.
CAUTION
•
The low-cut filter cannot be used with line input.
•
Use headphones to monitor when you are recording with a micro-
phone. If you use speakers to monitor, the sound output from the
speakers may also be recorded, causing a poor recording and
even feedback.
NOTE
The low-cut function can be set and changed even during
recording standby and when recording.
screen.
MENU
, and press the
INPUT SETTING
screen.
INPUT SETTING
for a channel, and press
LOW CUT
,
,
40Hz
80Hz
120Hz
Overview of recording modes
This recorder has five recording modes.
Use the
item on the
REC MODE
recording mode.
The settings available are different for each recording mode.
MONO mode
This is a mode for mono recording.
STEREO mode (default value)
This is a mode for stereo recording of two independent left and
right channels.
DUAL MONO mode
This mode uses one input source to create files at two different
input levels (set on
INPUT SETTING
be recorded.
DUAL ST mode
This mode uses one input source to create files that two different
input levels (set on
INPUT SETTING
will be recorded.
4CH mode
This mode records 4 external inputs in two pairs as two stereo
files.
4 – Recording
screen to set the
REC MODE
screen). Two mono files will
screen). Two stereo files
49
TASCAM DR-60D