Table of Contents
Advertisement
2 – Names and functions of parts
q File name
This shows the file name that is automatically assigned to a
recording file.
This shows the project name when there are multiple files
recorded in 4-channel recording mode or dual recording mode.
w Remaining recording time
The remaining recording time on the SD card is shown in hours:
minutes: seconds according to the recording mode, sampling
frequency and recording format settings.
e Low cut filter status
This shows whether the low cut filter is ON/OFF. (See "Using the
low-cut filter" on page 49.)
This icon is shown as light letters on a dark background if the
low-cut filter is set to
Hz,
40
2 or channels 3/4.
: Low cut filter off
: Low cut filter on
r Limiter function status
An icon appears if the limiter function setting for channel 1, 2 or
3/4 is set to
or
. (See "Using the limiter" on page 48.)
MONO
LINK
: Limiter off
: Limiter on
t SLATE button setting
This shows the SLATE button setting (enable/disabled).
(See "Adding slate tones" on page 62.)
: SLATE button disabled
: SLATE button enabled
y Peak value in decibels (dB)
Peak input level values are shown digitally.
28
TASCAM DR-60D
Hz or
Hz for channel 1, channel
80
120
Menu item list
Press the MENU button to open the
menu are as follows.
Menu item
Function
Set the recording
REC MODE
source.
INPUT SETTING
Make input settings.
Make recording
REC SETTING
settings
Make auto recording
AUTO REC
settings.
Make play area,
PLAY SETTING
repeat playback and
jump-back settings.
SD card file and folder
BROWSE
operations
OTHERS
Show submenu items.
screen. The items in this
MENU
Pages
page 49, page 50,
page 52, page 54
page 46, page 48,
page 49
page 40, page 42,
page 58, page 60,
page 61, page 62
page 56, page 59
page 68, page 71
page 64, page 69
page 70
page 36, page 46,
page 84, page 88,
page 89
Advertisement
Table of Contents
