Display - Tascam CD-RW901 Owner's Manual

2 − Features of the CD-RW901
ATT control right and left
b
screwdriver with these attenuators to reduce the out-
put level from either the right or left balanced analog
output. The adjustable level is up to -10 dB.
ANALOG OUT (BALANCED) (L, R)
n
connectors output analog audio signals at +4 dBu to
suitably-equipped units.
The wirings are: 1=grounding, 2=hot, 3=cold.
m
CONTROL I/O (parallel) terminal
D-sub connector to connect the unit to suitably-
equipped units, allowing control of the CD-RW901.
The pinouts of this connector are described (see
Connections" on page 9).

Display

!
E
R
SD F
This display shows various types of operation informa-
tion, including CD disc information, deck operation
modes, and menu status.
TOC The TOC indicator lights up red when a loaded
!
disc contains TOC (Table of Contents) data.
Track number display
@
tion, the track number is displayed.
When Incremental playback is on, and when in play-
back or playback ready mode, the
blinks.
MP3 The MP3 indicator lights when a MP3 disc is in
#
the deck.
Depending on the time display
Counter display
$
mode, TOTAL or REMAIN are lit. The counter display
indication are in minutes (three digits) and seconds
(two digits).
KEY The KEY indicator lights when Key Control is
%
on.
PITCH The PITCH indicator lights when Pitch
^
Control is on.
1
TASCAM CD-RW901
Use a small Phillips
These XLR
Use this 15-pin
@ # $ % ^
During playback or selec-
TRACK indicator
,
CONTROL I/O (RS-232C) terminal
patible serial control from an external PC can be
performed.
.
REMOTE IN terminal
RC-RW901 remote control unit.
/
Connects the power cable supplied.
AC IN jack
& * ( )
G HJ
A.CUE The A.CUE
&
on.
A.READY The A.READY
*
Ready is on.
The
A. TRACK A.TRACK
(
Track is on.
This displays the playback level, as well as
Meter
)
the input level of the source device.
A-B The A-B indicator lights when the A-B repeat
Q
function is on.
Also, this flashes until a "B-point" is entered.
The REPEAT
REPEAT
W
Repeat function is on.
SYNC The SYNC indicator lights up when SYNC is
E
on.
REC When the SRC function is on, this lights dur-
R
ing recording, or in recording standby mode.
When the SRC function is off, this flashes during
recording, or in recording standby mode.
RS-232C com-
Connects the supplied
Q W
T
Y
U
I
O
P
A
indicator lights when Auto Cue is
indicator lights when Auto
indicator lights when the Auto
indicator lights when the