3 Test & Copy
Note: Unexpected termination or cancellation of a test will not affect a target
CD-R disc. The target CD-R disc will remain blank and available for use.
However, CD-RW discs that contain data may be damaged and the data they
contained may be rendered unrecoverable. It may be necessary to re-start the
CD Duplicator if the target drive hangs during a sudden termination.
3 Test & Copy
The
function performs the test simulation and the copy process in one
Test & Copy
step.
The copy process is performed only if the simulation detects no problems. If the
simulation fails, the copy process is cancelled.
4 Verify
The
function verifies that the target disc was written completely and with
Verify
no errors.
5 Compare
The
function compares data on the source and target discs after the copy
Compare
process is complete.
Note: This function works only with data discs.
6 Prescan
The
function is performed on the source drive. This function scans the
Prescan
disc to determine the maximum data/audio extraction speed.
7 Disc Info
The
function displays detailed information about the source disc,
Disc Info
including sessions, tracks, capacity, etc.
8 Select Source
The
Select Source
Writer drive, or hard disk drive) as the source from which to copy. You can select
a hard disk drive only on those Tower CD Duplicator systems that feature a
factory-installed hard disk drive.
14
function enables you to select a drive (CD-ROM drive, CD
TASCAM Tower CD Duplicator User's Manual