Table of Contents
Advertisement
11.7 Auto Compare
11.7 Auto Compare
The
Auto Compare
target discs after a copy operation. The default setting is
11.8 Auto Prescan
The
Auto Prescan
a data/audio disc is inserted in the source drive. The default setting is
11.9 Eject Disc
The
setting controls the ejection of discs by the target drive. Three
Eject Disc
options are available:
❑
Eject Good Only
the default setting
❑
Eject All Disc
❑
Do Not Eject
ejection is required after every copy operation.
11.10 Burn on the Fly
The
Burn on the Fly
setting is
, data is copied directly from the source CD to the target CDs. When
ON
the setting is
OFF
hard disk drive, then copies the data to the target CDs.
This function is valid only on the CD-D17HD Tower CD Duplicator, which
features an internal hard disk drive.
11.11 Burn Mode
The
setting enables you to select from three writing methods:
Burn Mode
❑
Disc At Once (DAO)
❑
Track At Once (TAO)
❑
TAO Not Close
is the default setting.
DAO
18
setting controls auto-comparison of data between source and
setting controls automatic prescan of the source disc whenever
– This option ejects only successfully copied discs. This is
– This option ejects successful and failed copy discs.
– With this option, all discs remain in the target drive. Manual
function enables you to control the copy operation. When the
, the CD Duplicator first loads the data into a partition on the
.
OFF
TASCAM Tower CD Duplicator User's Manual
.
OFF
Advertisement
Table of Contents
