Setup Of This Receiver - Subaru AUDIO VIDEO & NAVIGATION SYSTEM Owner's Manual

Operation

Setup of This Receiver

Setup of This Receiver
You can select the guide tone, illumination and
another useful functions of this receiver.
ATTENTION
The VTR function cannot be used.
■
Enable guide tone
Turn the "Guide tone" ON or OFF. If turned ON,
a guidance tone can be heard when you
operate a button.
(1) Hold down the [SRC] button for 1 or
more seconds.
Audio mode will be turned OFF.
(2) Hold down the [CTRL] button for 1 or
more seconds.
(3) Touch Enable guide tone
It turns ON and OFF each time you touch
Enable guide tone
. (Default is OFF.)
Next
(4) Touch .
Done
(5) Touch .
ATTENTION
• If the DISC is not removed within 15 seconds
after ejecting the DISC, a BEEP is sounded
regardless of whether this setting is ON or
OFF.
• A BEEP is sounded regardless of whether
this setting is ON or OFF when the audio
mode is set to OFF.
■
Enable AUX
Turn the "AUX setting" ON or OFF. It is
recommended that the AUX setting is left in the
"ON" setting. If it is ON, you can select source
from the AUX input.
(1) Hold down the [SRC] button for 1 or
more seconds.
Audio mode will be turned OFF.
- 20 -
(2) Hold down the [CTRL] button for 1 or
more seconds.
Enable AUX
(3) Touch
It turns ON and OFF each time you touch
Enable AUX
. (4) Touch Next
Done
(5) Touch
■
Dim sub-display
If "Enabled",
changes when you turn the car lights (side
marker light, tail light, and license plate light)
ON.
(1) Hold down the [SRC] button for 1 or
more seconds.
Audio mode will be turned OFF.
(2) Hold down the [CTRL] button for 1 or
more seconds.
Dim sub-display
(3) Touch
It turns ON and OFF each time you touch
Dim sub-display
Next
(4) Touch
Done
(5) Touch
.
. (Default is ON.)
.
.
the sub-display brightness
.
. (Default is ON.)
.
.