Table of Contents
Advertisement
Device
Restoring configuration revisions
42
To compare configuration revisions from within the FortiGate web-based
manager
1
In the FortiGate web-based manager, go to System > Maintenance > Revision
Control.
2
In the Action column, in the row corresponding to either one of the revisions that
you want to compare, select Diff.
3
In Revision Diff, from "Diff With", select a second revision for comparison. You can
either:
Original Revision
Compared With
Revision Number
4
Select OK.
A new window appears, containing each configuration revision in a separate
columns, with changes highlighted.
•
Green highlight: added line
•
Yellow highlight: changed line
•
Red highlight: deleted line
You can scroll down through the changes, or select a double arrow (<< or >>)
located at the top to jump to the exact position of the next or previous change.
You can restore a previous configuration to your device by using configuration
revisions received by the service.
To restore a configuration revision or script
1
In the FortiGate web-based manager, go to System > Maintenance > Backup &
Restore.
2
In "Restore configuration from", select FortiGuard to restore a configuration from
the portal web site.
3
Select Browse to locate the configuration revision or script ("template") to apply.
4
Select Restore.
A success message appears.
Settings successfully uploaded. Please wait while the system
restarts.
FortiGuard Analysis and Management Service Version 1.2.0 Administration Guide
The revision number
Select one of the following to compare the configurations:
Current Config – Compares with the current configuration on
your device.
Select Revision – Compares with another revision number that
you choose by selecting from the descriptive list that includes
revision numbers, times, administrators, and associated revision
comments for each revision.
Specify Revision – Compares with another revision number that
you choose by typing it.
The revision configuration that you are going to compare the
original revision configuration with.
If you select Select Revision, a list of the revision configurations
appears with the revision number, date and time, user associated
with that revision, and a comment.Select one of these revisions.
If you select Specify Revision, enter a number for the revision
configuration you want to compare with the original revision
configuration.
Management
13-12000-406-20081031
Advertisement
Table of Contents
Need help?
Do you have a question about the FortiGuard Analysis and Management Service 1.2.0 and is the answer not in the manual?
Questions and answers