Adding And Editing Devices - Fortinet FortiGuard Analysis and Management Service 1.2.0 Administration Manual

Management

Adding and editing devices

1
2
3
4
FortiGuard Analysis and Management Service Version 1.2.0 Administration Guide
13-12000-406-20081031
Basic Information section
IP The internal IP address of the device.
Time Zone The time zone associated with that device.
Firmware The current firmware image running on the device. The firmware
image is displayed in the format:
v<firmware_version>-<build_number>(<maintenance
release_number>).
Automatically The current action the device will take when a configuration is saved:
Upload Config NO – the device will not automatically upload the configuration
YES – the device will automatically upload the configuration.
Select Change to change whether the device will automatically upload
a saved configuration or not.
Tasks section
Upgrade Upgrade the firmware on the device. For more information about
upgrading a device's firmware, see
Firmware
device" on page 45
on page 44.
Run Script Run a script file. For more information about scripts, see
scripts" on page 46
Show Available Displays all available firmware for the devices. For more information,
see "Viewing available firmware images" on page
Firmware
Scheduled Task The name of the scheduled task.
Type The type of task that will be performed. There are three types: Config
(configuration upload), Script (running a script), and Firmware
(upgrading a firmware image).
Scheduled Time The date and time of when the schedule task will begin. The date and
time are in the format, yyyy-mm-dd hh:mm:ss.
Status The status of the scheduled task.
Action The action you can take to delete or edit a schedule. The Delete and
Edit icons appear after the schedule task starts.
Revision History section
The Revision History section provides a list of backed up
configurations. You can also compare configurations to view what
changed between revisions. For more information, see
configuration revisions" on page
You can add devices to the contract or edit the daily volume and quota for a
device. Adding devices to a contract is available only if your contract allows it.
To add a device
Go to Management > Device.
In the Device section, select Add Device.
Enter the appropriate information for the following:
SN Enter the serial number of the device.
Quota (G) Enter the total amount of disk space that the device is allowed to
use.
Daily Volume (M) Enter the amount of disk space that the device is allowed to
consume per day.
Comments Enter any comments or descriptions for that device, if applicable.
Select Submit.
"Changing firmware from the
and "Changing firmware from the portal web site"
and "Running scripts" on page
39.
Device
"Creating
43.
44.
"Viewing
37