Sony DSC-HX20V Service Manual page 17

q; While holding the Feed-Through Cam Tube, turn the Rotary Tube Assy clockwise (approx. 5 degrees) and remove the Lens Block from
the Feed-Through Cam Tube.
Feed-Through Cam Tube
Rotary Tube Assy
qa Turn the Feed-Through Cam Tube and set the Projection (large) on the Feed-Through Cam Tube and the Gear of the Rotary Tube Assy
at the positions shown in the figure, and then remove the Feed-Through Cam Tube from the Rotary Tube Assy.
Feed-Through Cam Tube
Gear
Projection (large)
Eyepiece side
Feed-Through
Cam Tube
Gear
Gear
Projection
(large)
DSC-HX20/HX20V/HX30/HX30V_L2
Lens Block
Feed-Through Cam Tube
Eyepiece side
Projection
(large)
Gear
Rotary Tube Assy
qs While holding the Cam Tube (B) Assy, fully turn the Straight Tube (A) Assy clockwise (approx. 120 degrees) and remove
the 2nd-4th Lens Block from the 1st Lens Block.
Cam Tube (B) Assy
Straight Tube (A) Assy
qd Remove the Ornamental Ring (A), Barrier Assy, and 1st Lens Assy from the Straight Tube (A) Assy.
Note: For how to remove the Ornamental Ring (A), Barrier Assy, and 1st Lens Assy, refer to "1-8. Ornamental Ring A or Barrier Assy
Replacing Method."
Feed-Through
Straight Tube (A) Assy
Cam Tube
1-14
2nd-4th Lens Block
1st Lens Block
Note: For how to remove the Ornamental Ring (A),
Barrier Assy, and 1st Lens Assy, refer to "1-8.
Ornamental Ring A or Barrier Assy
Replacing Method."
Ornamental Ring (A)
Barrier Assy
1st Lens Assy