Sonnet Fusion RAID Storage Systems Operation Manual page 65

Appendix A - CLI ASCII-Based Interface
• SESStartingSlot (Disabled on Error)
SESStartingSlot establishes the starting slot/ID number for all
attached SES enclosures.
set SESStartingSlot [0 | 1]
get SESStartingSlot
• SESStatus (Immediate, Disabled on Error)
SESStatus displays the last polled status of the specified element
type in the specified enclosure. SupportLevel indicates the
SES features supported by the specified enclosure: Fan, Power,
Temp, Alarm, DriveLEDs. If no element type is specified, all
status is displayed. Note that SESEnclosures must be executed
prior to executing SESStatus.
SESStatus [EnclIdx] <ENC | DRIVE | FAN | POWER
| TEMP | ALARM | SUPPORTLEVEL>
• Time (Disabled on Error)
Sets or displays the current time as in 24 hour format.
set Time [HH: MM: SS]
get Time
• TimeZone
Sets or displays the time zone or an offset from GMT. GMT
offset must be in the format +/-HH:MM
set TimeZone [[EST | CST | MST | PST] | [[+|-
] [HH] : [MM]]]
get TimeZone
• VerboseMode (Enabled)
Controls the level of detail in CLI Help output and command
response output.
Default: enabled
set VerboseMode [enabled | disabled]
get VerboseMode
• VirtualDriveInfo (Immediate)
Displays characteristics and statistics for all the available virtual
drives or any available virtual drive identified by its virtual
drive ID.
VirtualDriveInfo <Virtual Drive ID>
• WrapEventLog (Enabled, Disabled on Error)
When enabled, the unit logs up to 2,048 event entries before
wrapping (overwriting the first entries). If disabled, the unit
stops logging event entries when the buffer is full.
Default: enabled
set WrapEventLog [enabled | disabled]
get WrapEventLog
xiii