Sonnet Fusion RAID Storage Systems Operation Manual page 60

Appendix A - CLI ASCII-Based Interface
• Help (Immediate)
Displays a list of available commands. If command name is
specified, displays detailed command-specific information
Help <command>
• HSAdd (Immediate)
Assigns a drive to the Hot Spare pool.
HSAdd [BlockDevID]
• HSDisplay (Immediate)
Lists all drives in the Hot Spare pool.
HSDisplay
• HSRemove (Immediate)
Removes a drive from the Hot Spare pool
HSRemove [BlockDevID | all]
• Info (Immediate)
Displays version numbers and other production information for
key components. Use the optional "brief" parameter to display
a more concise subset of system information.
Info <brief>
• IsReserved (Immediate)
Displays the reservation status of the current services session or
interface.
IsReserved
• MediaScanErrorReport (Immediate, Disabled on Error)
Displays media scan error statistics for either a single drive or all
drives in the system
MediaScanErrorReport [BlockDevID | all]
• Metrics (Immediate)
Controls the collection of standard data metrics within a
product based on the command parameters.
Metrics [Start | Stop | Display] [drive
[BlockDevID] | all | running]
• OEMConfigFile (Disabled on Error)
This command returns the "name" (i.e., the contents of the
first record) of the OEM configuration file stored in persistent
memory.
get OEMConfigFile
• Partition (Immediate)
Creates a specified partition to the specified capacity in
Gigabytes (GB), Megabytes (MB), or blocks. The specified
capacity must be smaller than the specified partition's current
capacity. A new partition is created to acquire the remainder of
the original partition's space.
Partition [GroupName] [PartIndex] [capacity] [GB
| MB | blocks]
• PartitionDisplay (Immediate)
Lists all the partitions available in the specified RAID group. The
partitions are listed contiguously (as opposed to index order).
GroupName is the ASCII name of the RAID Group for which
partitions will be displayed.
PartitionDisplay [GroupName]
• PartitionMerge (Immediate)
Merges the specified contiguous partitions into one partition.
GroupName is the ASCII name of the RAID Group containing
the partitions to merge. PartIdx is the index of a partition to
merge, along with a number of contiguous partitions to merge
to that index. "All" indicates that all partitions in the RAID
Group will be merged into a single Virtual Disk. The RAID
Group must not be in a NEW state. None of the partitions to
merge may be mapped.
PartitionMerge [GroupName] [[[PartIdx] [2-128]] |
All]
• PartitionSplit (Immediate)
Divides the specified partition into one or more partitions
whose capacities are evenly distributed among the capacity of
the original partition. GroupName is the ASCII name of the
RAID Group containing the partition to split. PartIdx is the
index of the partition to split. The partition to split cannot be
mapped and the RAID group must not be in a NEW state.
PartitionSplit [GroupName] [PartIdx] [1-128]
• PartitionWriteCache
If enabled, allows higher write performance with a small risk
of data loss after a system failure. If disabled, provides a higher
level of data integrity with lower write performance.
set PartitionWriteCache [GroupName] [PartIdx]
[enabled | disabled]
get PartitionWriteCache [GroupName] [PartIdx]
viii