Deactivating Or Activating The Easy-Start Feature - Philips EasyClean 500 series User Manual

Note: When the Sonicare is used in clinical studies,
the handle should be fully charged. Deactivate the
Easy-start feature and for areas where excess staining
occurs, an additional 30 seconds of brushing time can
be spent to assist with stain removal.
Features
Easy-start
This Sonicare model comes with the Easy-start
feature activated.
The Easy-start feature gently increases the power
over the first 14 brushings.
Note: Each of the first 14 brushings must be at least
1 minute in length to advance through the Easy-start
ramp-up cycle properly.
deactivating or activating the Easy-start
feature
1 Attach the brush head to the handle.
2 Place the handle in the plugged-in charger.
- To deactivate Easy-start:
Press and hold the power on/off button for 2
seconds. You hear 1 beep to indicate that the Easy-
start feature has been deactivated.
- To activate Easy-start:
Press and hold the power on/off button for 2
seconds. You hear 2 beeps to indicate that the Easy-
start feature has been activated.
Note: Using the Easy-start feature beyond the initial
ramp-up period is not recommended and reduces
Sonicare's effectiveness in removing plaque.
English
9