System Requirements; Product Registration - Socket Rugged CF 10/100 Card User Manual

•
IP Info page: View comprehensive IP address information. Quickly renew or
release the IP address assigned by DHCP.
•
Auto-Launch page: Configure your device to automatically launch any program
of your choice after the card is inserted.
•
Power page: Choose the level of power consumption by selecting the link speed.
For software updates, please visit:

System Requirements

Your device should meet these minimum requirements:
•
Windows Mobile 2003, 2003SE or 5.0 for Pocket PC or Windows Mobile 6 Classic
•
Available CF or PC Card slot
(Operation in PC Card slot requires a PC Card adapter.)
•
Software installation requires a host computer running Windows Vista and the
Windows Mobile Device Center or a Windows 2000/XP computer with ActiveSync
4.5 or greater for Windows Mobile 6 or ActiveSync 4.0 or greater for Windows
Mobile 5.0
Note: The Rugged CF 10/100 Card is NOT NE2000 compliant.
WARNING!
If you are using Windows Mobile 2003/2003SE, DO NOT install
ActiveSync 4.0, or you will not be able to synchronize your device and
host PC over an Ethernet connection!
Microsoft removed this feature from ActiveSync 4.0. If your Windows
version does not require ActiveSync 4.0, Socket Mobile recommends
that you use an older version of ActiveSync that supports device
synchronization over Ethernet.

Product Registration

Socket Mobile highly recommends that all customers register their products.
Registered users receive priority technical support and can choose to receive special
offers, product upgrades, and new product information. Register online at:
http://support.socketmobile.com/
CHAPTER 1: INTRODUCTION
http://www.socketmobile.com/support/downloads/
5