SIIG FireWire 800 DV Kit Quick Installation Manual page 5

Table of Contents

Advertisement

Windows XP
Windows XP automatically installs it's built-in FireWire
400 driver for the FireWire 800 32-bit PCI. To get the full
speed out of this controller, install the Firewire 800 driver
using the directions below.
1.
Insert the driver CD. Click Start, Run. Type
32-bit : Type D:\setup32.exe, click OK. (Change D:
to match your CD-ROM drive letter)
64-bit: Type D:\setup64.exe, click OK. (Change D:
to match your CD-ROM drive letter)
2.
At the Welcome screen, click Next.
3.
At the License Agreement screen, click Yes.
4.
At the Destination Location screen, click Next.
5.
Select Complete, then click Next.
6.
At the Select Program Folder screen, click Next.
7.
At the Software Installation screen, click Continue
Anyway, then click Finish.
8.
Select the restart Windows option, then click Finish.
Windows Server 2003
Windows Server 2003 automatically installs it's
built-in FireWire 400 driver for the FireWire 800 32-bit PCI.
To get the full speed out of this controller, install the
FireWire 800 driver using the directions below.
1.
Insert the driver CD. Click Start, Run.
32-bit : Type D:\setup32.exe, click OK. (Change D:
to match your CD-ROM drive letter)
64-bit: Type D:\setup64.exe, click OK. (Change D:
to match your CD-ROM drive letter)
2.
At the Welcome screen, click Next.
3.
At the License Agreement screen, click Yes.
5

Advertisement

Table of Contents
loading

Table of Contents