Advertisement

INTRODUCTION

The V-9020 Ceiling Speaker is designed to easily
install into standard T-Bar suspended ceilings by
replacing 1/2 of a 2' x 2' ceiling tile (or 1/4 of a 2' x 4'
tile). The 1' x 2' perforated grille provides increased
sound dispersion over conventional round speaker
grilles and blends into the ceiling by providing the
appearance of a standard air return.
The speaker assembly features a perforated steel
grille, finished with a durable white epoxy powder
paint and an 8" full-range speaker. The V-9020 is
provided with a single input 1 Watt amplifier and
operates on 24VDC. A 24" T-Bar is included to cover
the area where the speaker assembly and ceiling tile
meet.

SPECIFICATIONS

Features
Perforated steel grille with white epoxy paint
8" (20.32cm) speaker
Dimensions / Weight
Dimensions:
23.75" L x 11.82" W x 3.40" D
(60.33cm L x 30.02cm W x 8.64cm D)
Weight:
Technical Specifications
Power Rating:
Operating Voltage / Current:
SPL at 1 Meter with 1 Watt Input:
Environment
Temperature:
0 to 50 Deg. C (32 to 122 Deg. F)
Humidity:
Coverage
The area covered by the V-9020 Ceiling Speaker is
determined by the height of the ceiling. If the ceiling
height is 8 feet, the speaker will cover 250 sq. ft. With
a ceiling height of 9 to 15 feet, the speaker will cover
400 sq. ft. If the ceiling is 16 to 25 feet high, the
speaker will cover 850 sq. ft.
V-9020 – CEILING SPEAKER
6.5 lbs. (2.95) Kg.
1Watt Continuous
24VDC, 50mA
97dB
0 to 85% non-precipitating

CONNECTIONS

MOUNTING

When mounting in a 2' x 2' tile ceiling, cut ceiling tile
in half (When mounting in a 2' x 4' tile, remove 1/4 of
the tile). Make connections and place speaker on
ceiling grid. Slide T-Bar under edge of speaker. Drop
remainder of cut tile next to speaker.
1
VSP-V-9020
Issue 6
947911

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V-9020 and is the answer not in the manual?

Questions and answers

Summary of Contents for Valcom V-9020

  • Page 1: Technical Specifications

    The speaker assembly features a perforated steel grille, finished with a durable white epoxy powder paint and an 8" full-range speaker. The V-9020 is provided with a single input 1 Watt amplifier and operates on 24VDC. A 24" T-Bar is included to cover the area where the speaker assembly and ceiling tile meet.
  • Page 2: Technical Assistance

    This warranty is in lieu of and excludes all other warranties, expressed or implied, and in no event shall Valcom, Inc. be liable for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase, operation, or use of the product.

Table of Contents