Installing The Dvr Station - Archos Gen 5 User Manual

1. Connect the included charger/adapter to the jack labeled
DVR Station.
2. Then plug the other end of the charger/adapter into an available wall socket.

If you have correctly connected the charger/adapter, the DVR Station's LED indicator
(on the front of the device, on the right side) will light up.
▲
Use only the supplied ARCHOS charger/adapter as other adapters may damage this device (even if they
!
give the same voltage rating).

2.4. insTalling THe dVr sTaTiOn

• The way you install your DVR Station will vary depending on the number of audio-vi-
sual devices you have and how your entertainment system is set up.
• These different ways of installing the DVR Station are described in the following sec-
tions.
tUner anD tV ( DiagraM
• This shows the basic connection setup of a television source (tuner), the DVR
Station, and your TV.
• When connected to your ARCHOS device, TV and tuner (satellite receiver, digital
TV receiver, cable/DSL box, VCR or DVD Recorder), the DVR Station will allow
you to do everything described in the Introduction .
1
Your tuner needs to be connected to your home antenna/satellite/cable.
2
Connect your tuner's TV outputs to the DVR Station's inputs.
3
Connect the DVR Station's outputs to your TV's inputs.
In order to display the contents of the ARCHOS on your TV, make sure that the ARCHOS
4
TV Settings
" " reflect your DVR/TV configuration:
-
From the Home Screen, select the "
Display
" ".
-
TV Standard
"
patible with your country's television system.
-
TV Connection
"
TV.
You can also connect your DVD player (output) either to your TV (if it has secondary input connector)
or to your tuner (if it has an input connector).
B
on the connection gUiDe )
NTSC (USA)
": " " or "
": based on how you have connected the DVR Station to your
dC-in
Settings
" menu item, then choose
PAL (Europe)
": select the one that is com-
User ManUal - version 3
on the back of the