Archos Gen 5 User Manual page 10

DVR Station Gen 5
tV only ( DiagraM
When connected to your ARCHOS device and TV, the DVR Station will allow you to
do everything described in the Introduction ,
1. Connect the DVR Station's outputs to your TV's inputs (to display the image of the
ARCHOS device on your TV).
2. Connect your TV's outputs to the DVR Station's inputs (to be able to record from your
television). Verify that your TV has audio/video outputs. Check your television manual.
3. In order to display the contents of the ARCHOS on your TV, make sure that the
TV Settings
ARCHOS "
-
From the Home Screen, select the "
-
TV Standard
"
-
TV Connection
"
tV only ( DiagraM
If your TV has no audio/video outputs, you will not be able to record from it. You will
only be able to display the contents of the ARCHOS on your TV.
1. Connect the DVR Station's outputs to your TV's inputs.
2. Make sure that the ARCHOS "
-
From the Home Screen, select the "
-
TV Standard
"
-
TV Connection
"
final stePs
1. Do not place the ARCHOS in the powered DVR Station yet.

If you can still watch TV, it means that you have correctly connected the DVR
Station as a pass-through device.

If you cannot watch TV anymore, this means that there is an incorrect connection.
Check the previous connections steps carefully.

C
on the connection gUiDe )
" reflect your DVR/TV configuration:
NTSC (USA)
": " " or "
": based on how you have connected the DVR Station.
D
on the connection gUiDe )
TV Settings
NTSC (USA)
": " " or "
": based on how you have connected the DVR Station.
except
scheduling TV recordings.
Settings
" menu item, then choose "
PAL (Europe)
".
" reflect your DVR/TV configuration:
Settings
" menu item, then choose "
PAL (Europe)
".
Display
".
Display
".