Archos Gen 5 User Manual page 17

TV Receiver
2. " ": select the type of tuner that you want to control with the IR Emitter
VCR Cable/DSL box
(" ", "
Receiver brand
3. "
the remote control to scroll the list faster.
Test power Off code
4. Select the "
ARCHOS device will then try to turn your tuner off. After a few seconds, your
ARCHOS will ask you if the device responded correctly:

If your tuner turned off, select "

If your tuner did not turn off, select "
the tuner off again, using a different code. Repeat this operation until the ARCHOS
manages to turn the tuner off.
If none of the codes work, check that the DVR Station is positioned in a way that allows the infrared signal to
reach your tuner's receiver. Note: In some rare cases the ON/OFF functionality may not work.
2 test: changing channels on your tuner
nd
Yes
After you select "
to correctly set the parameters so that the DVR Station can change channels on your tuner
(for a scheduled recording).
Channel
1. For the "
on your tuner.
Satellite Receiver
", "
": choose the brand of your tuner. You can use the
" button. Make sure that your tuner is on. Your
Yes
", and move on to the next section.
" at the end of the 1
" parameter, select the highest channel that is currently memorized
DVD Recorder
", "
No, try next code
". Your device will try turning
test, the following screen appears. It allows you
st
User ManUal - version 3
Digital TV
" or " ").
buttons on
5