Humidity Control - Aprilaire 8910 Owner's Manual

INDOOR AIR QUAlITy fUNCTIONS
EVENT-bASED ™ AIR ClEANING
(CONTINUED)
Air Cleaning Screen
12
INDOOR AIR QUAlITy fUNCTIONS

HUMIDITy CONTROl

press [HUMIDITy CONTROl] on the Home screen to
enter the Humidity Control screen .
AIR CLEANING MODE
SELECTION
AIR CLEANING MODE
aDJUsTMEnT
The Humidity control screen can be used to control both
humidification and dehumidification .
If humidification is installed it can be controlled in two
modes, automatic or manual.
CANCEL BUTTON
automatic or manual mode is configured by the installer.
(EXIT AIR CLEANING)
To determined which mode the Home Comfort Control is
set to, see the diagrams on pages 14 and 16.
DONE BUTTON (SAVE MODE
AND EXIT AIR CLEANING)
In automatic mode you will receive the optimum
amount of humidity so that your home and its
furnishings are protected from the damaging effects
of excess condensation or low humidity during heating
season. The control automatically adjusts your home's
rH based on the outdoor temperature.
The humidity setting needs to be set initially to
meet your home's conditions. Please follow these
steps when adjusting your control.
1. a djust the humidity setting to "3" which is within
normal range . During the next 24-48 hours it may
be necessary to adjust the setting for more or less
humidity, depending on your personal comfort and
home's requirements .
2 . During the coldest portion of the first heating
season, minor adjustments may be necessary. This is
dependent upon your home's construction .
The rH in your home will now be accurately controlled
to meet your needs and should not need further
adjustment during future heating seasons.
13