Introduction; Led Indicators - Apricorn Aegis Secure Key User Manual

Apricorn Aegis Secure Key

Introduction

Thank you for purchasing the Apricorn Aegis Secure Key. The Aegis
Secure Key works by simply entering your desired 7-15 digit PIN directly onto
the onboard keypad. The Aegis Secure Key can then be connected to any
USB port on any computer. Should the Key be lost or stolen, you can rest
assured that all data held on the Aegis Secure Key is safe and cannot be
accessed by any unauthorized third party
We recommend that you download and print the manual first before making
any changes. The manual can also be found at www.apricorn.com, then
select Aegis Secure key.

1. LED indicators

Blinking Key is unlocked, plug into USB port
Blinking Key is locked
Blinking Data is being transferred
Blink alternately Error
Blink together Accepting User PIN
Intensify Security self testing
Note: The batteries are not fully charged when you receive your Aegis Secure
Key. The battery should be charged prior to first use. Please plug in the Key to
a powered USB port for 90 minutes to fully charge your battery
Lock LED, stand by with the Key locked
Unlock LED, Key is unlocked when flashing
Keypad
Key button, used to activate the Key and to
enter PIN codes
Blue LED, when on, the Key is connected to the
computer. when flashing data is being transferred
Key ring, unscrew to add to key ring.
On solid
On solid
On solid
On solid
Double blink Accepting Admin PIN
Double blink Accepting Admin PIN
Page 2
Key connected to USB port
Key does not have a User PIN
Key connected with host computer
Key accepting new PIN code