F3-Library - AMX AXWire Instruction Manual

FIG. 2 Edit menu option descriptions

F3-Library

Select the F3 key to display a menu similar. The top menu option will be highlighted when this
menu is selected. Use the up and down arrows to move the highlight bar over the desired option.
Library files are stored on your disk with a .LIB filename extension.
If you add a library file to the AXWire data file and select the SAVE menu option, the
current file will overwrite the pre-existing file.
AXWire AX Series Wiring Information Program
Connects
TOGGLE CONNECT inserts or deletes a connect at the current position of the
highlight bar. Connects (FIG. 2), the short pair of horizontal lines appearing between the
connector outline and the FUNCTION column, are used to show a wire connection. The
shortcut is ctrl-c.
DELETE CARD deletes the currently selected card.
INSERT displays a blank screen.
SAVE saves the currently highlighted data block as a library file. Blocking is described in
the Alt-Key Editor Commands section on page 2. When running the AXWire program,
you must enter AXWire /L at the MS-DOS prompt to enable the Save option.
SAVE AS overwrites an existing library file. When running the AXWire program, you
must enter AXWire /L at the MS-DOS prompt to enable the Save As option.
RENAME renames the current library file. When running the AXWire program, you
must enter AXWire /L at the MS-DOS prompt to enable the Rename option.
Combined card part
and library data (overlay)
Axcess card
type
Supporting
text
Product Information
Alternate
Configuration
Divide
5