Ir Document Window; Properties Window - AMX IREDIT V1.2 Instruction Manual

IR Document Window

The IR Document window contains a list of 255 channels with the names of the functions that
occupy any of those functions. There is one IR document window per IR hand control file. This is
the main window for editing IR files. If a template has been applied to the IR file, the corresponding
value appears in the Template column.
Tabs with the hand control file's names are present at the top of the IR Document window, allowing
you to easily switch between hand control files when more than one are open.
Right-click on a slot within the IR Document window to open the IR Document Context Menu:
IR Document Context Menu
Cut
Copy
Paste
Delete
Properties • Shows the properties for the selected hand control file in the Properties window.

Properties Window

Use the Properties window to view all of the pertinent header information for a given hand control
file. Some fields accept text, while others have pull-down menus or activate an edit dialog (as with
the Note field).
FIG. 7 Properties Window
IREdit
• Cuts the selected slot to the clipboard.
• Copies the selected slot to the clipboard.
• Pastes the selected slot from the clipboard to the new slot location.
• Deletes the selected slot.
The Properties window updates based upon selections made in the Navigator and IR
Documents window.
The Properties window can be formatted with a Categorized
Within the Properties window, all bold fields can be edited.
IREdit Program Overview
or Alphabetic sort.
9