Advertisement
Tri Phase™
Universal DMX Control:
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Tri Phase™ is a four DMX channel DMX fixture. See page 12
for detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instructions on page 8 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows a single unit or several units
linked together, to run to the beat of the music.
1. Tap the MENU button until
ENTER.
2. Press the UP or DOWN button so that "On" is displayed.
The unit will now run to the beat of the music.
3. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Master-Slave Operation (Sound Active):
you to link up to 16 units together and operate without a controller. The
units will be sound activated. In Master-Slave operation one unit will
act as the controlling unit and the others will react to the controlling
units programs. Any unit can act as a Master or as a Slave.
1. Using standard XLR microphone cables, daisy chain your units
together via the XLR connector on the rear of the units. Remem-
ber the Male XLR connector is the input and the Female XLR
connector is the output. The first unit in the chain (master) will use
the female XLR connector only - The last unit in the chain will use
the male XLR connector only. For longer cable runs we suggest a
terminator at the last fixture.
2. On the Master unit find your desired show and set that show by
American DJ
- www.americandj.com - Tri Phase™ Instruction Manual Page 11
®
This function allows you to use a Elation
"SOUN" is displayed, and press
This function will allow
Operation
Tri Phase™
pressiing the ENTER button.
®
3. On the slave units
played, select your desired slave mode and Press ENTER.
4. The slave units will now follow the Master unit.
5. The optional UC3 Controller (not included) may be used to con-
trol different functions including blackout.
Tri Phase™
Channel
1
2
3
4
Tri Phase™
Stand by
Function
Mode
Tri Phase™
First unplug the power. The fuse holder is located next to the power
cord. Using a flat-head screw driver unscrew the fuse holder. Remove
the bad fuse and replace with a new one.
American DJ
tap the MENU button until "SLND" is dis-
Value
0 - 255
COLOR SELECTION
ROTATION
0 - 9
NO ROTATION
10 - 120
CLOCKWISE FAST - SLOW
121 - 134
NO ROTATION
135 - 245
COUNTER-CLOCKWISE
SLOW - FAST
246 - 255
NO ROTATION
1 - 255
STROBING SLOW - FAST
0 - 255
DIMMER 0% - 100%
Blackout the unit
1. Synchronous Strobe
2. Two light Strobe
3. Sound Control
Strobe (LED OFF)
- www.americandj.com - Tri Phase™ Instruction Manual Page 12
®
Operation
DMX Traits
Function
UC3 Control
Rotation Speed
1-8
Chase (LED ON)
Fuse Replacement
Advertisement
