Table of Contents
Advertisement
NSS-Vote Operation
Roll Call
At any time during the session, you may call for the roll. Select the Roll Call button to display the
roll call screen, and select the Request Roll Call from Voting Stations button to begin the roll call.
Members are prompted to select a Present button on their panel. The Roll Call screen displays each
member and their attendance status. You can manually mark a member present or absent by
selecting their chair. You can mark all members present or Absent by selecting Present or Absent
from the bottom of the screen.
FIG. 4 Console Roll Call
The roll call result is included in the agenda result along with the time and date of the roll call when
you select Record Roll Call to Voting Results.
Additionally, you can choose the Disable Absent Stations button after taking a roll call to
deactivate all physical voting stations that were not marked as present. After selecting the Disable
Absent Stations option, you will be automatically taken to the Voter Status page to see which
stations are enabled/disabled.
If a station is manually marked as present after disabling absent stations, or another
roll call is taken, you must re-select the Disable Absent Stations button to reset the
active/inactive stations.
16
NSS-Vote User's Guide
Advertisement
Table of Contents
