Advertisement
Micro Sky
ADJ Products, LLC - www.adj.com - Micro Sky Instruction Manual Page 7
Laser Warning Labels
Micro Sky
1. Main input: Connect to main power.
2. Power Switch: Turns On/Off the power.
3. Fan: Cool the unit.
4. Speed: Used to adjust the speed under Auto mode (slow to fast).
5. Remote code：To activate your remote or erase remote code.
6. Microphone：Receives the sound to control the unit.
7. Auto/Sound switch button: Press to switch between Auto-play or
Sound active mode.
Auto mode: The unit will run at a slow or fast speed.
Micro Sky
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
Operating Modes:
• Sound Active Mode - The fixture will react to sound, chasing
through the built-in programs.
• Auto Play - This function run automatically run through all of units
patterns.
Sound Active Mode: This mode allows the unit to run to the beat of
the music.
1. Press the Auto/Sound button. When the red indicator light
located on the front of the unit turns off, but flashes to the
beat of the music, the unit is in sound active mode.
ADJ Products, LLC - www.adj.com - Micro Sky Instruction Manual Page 8
Control Panel
Operation
Advertisement
