System Menu; Sound Active Mode - American DJ Accu Spot 300 User Instructions

Accu Spot 300
New control board show menu of ACCU SPOT 300
0 ADDR AXXX A001
1 TEST T-01~T-XX
RUN MSTR/ALON
AUDI MSTR/ALON
2 PLAY
AUTO OFF/ RUN / AUDI
3 LAMP ON/OFF
ALL
SCAN
COLR
4 RESE
GOBO
SHTR
OTHR
LIFE 0000~9999
LAMP 0000~9999
5 TIME
CLMP
6 RPAN ON/OFF
7 RTLT ON/OFF
8 MIC M-XX M-70
VALU D–XX D-00 (DXXX)
9 DISP D ON ON/OFF
FLIP ON/OFF
LAAU ON/OFF
RDMX ON/OFF
DLOF ON/OFF
DLAY D–XX D-05
SPOT ON/OFF
10 SPEC
DFSE ON/OFF
FEED ON/OFF
VER V1.0~V9.9
CODE
ADJU
CH01~CH30
STEP S–01 ~S–48
C–01~C–30
SCXX
11 EDIT TIME
CEDT
REC. RE.XX
RUN ON/OFF
American DJ - www.americandj.com - Accu Spot 300 Instruction Manual Page 13
®

System Menu

Indicate the staring DMX address
A001 also is the setting for slave
Automatically test the function
Runs fixture as "master" or "alone" for auto
Runs fixture as "master" or "alone" for audio
Runs fixture for no DMX
Manually switches lamp "on" and "off"
Reset all motors and returns fixture to home
Reset only motors for pan/tilt
Reset only motors for colors
Reset only motors for gobo and rotation
Reset only motors for shutter and/or dimmer
Reset other motors
Displays the total fixture running time
Displays a lamps running time
Clear lamp running time
Reverses the pan movements
Reverses the tilt movements
Mic sensitivity
Display the DMX512 value of each channel
Display turn off after 2mins
This function will reverse the display 180
Automatic lamp start with power
Change DMX address via external controller
Switch lamp via DMX
Lamp on delay time
Lamp optimization
Resets all the fixture functions to default
Pan/tilt feedback (error correction) on/off
Software version
CXXX Fixture code *code is "C050"
XXXX(-128~127) Motor Fix
Set the amount of your program
0 1 XX(00~FFH)
Edit the channels of each scene
3 0 XX(00~FFH)
T XXX(001~999) Time for each scene
ON/OFF Edit program via controller
Auto Save
Program test
Accu Spot 300
ADDRESS MENU -
AOO1 - A511 (Value) - This is where you set the DMX address of
the unit.
TEST MENU -
T-01 - T-XX (Test) - Tests the functions of each channel. There
are eight channels, but only channels 1, 2, 3, 4, 6, 7, and 9 can
be tested.
PLAY MENU -
RUN - Runs the unit as a "master" or in a stand alone mode. The
unit will run a internal program mode.
AUDI (Audio) - Runs the unit as a "master" or in a stand alone,

sound active mode.

AUTO - Runs the internal program.
RESE (RESET) MENU -
ALL - Resets all the motors in the unit.
SCAN - Resets the motors that control pan/tilt.
COLR (Color) - Resets the color motors.
GOBO - Resets the gobo motors.
SHTR - Resets the shutter/dimmer motors.
OTHR - Resets all other motors.
TIME MENU -
LIFE - Displays the fixtures total running time.
LAMP - Displays the lamp running time.
CLMP - Clears the lamp running time.
RPAN (REVERSE PAN) MENU -
ON/OFF - When "On" is chosen it will reverse the pan.
American DJ - www.americandj.com - Accu Spot 300 Instruction Manual Page 14
®
System Menu