Master Dimmer - American DJ Inno Color Beam 12 User Instructions

Inno Color Beam 12
Universal DMX Control:
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs. The Inno Color Beam 12
has 2 DMX channel modes; a 9 Channel Mode & 16 Channel Mode.
To select your channel mode see page 8.
1. This function will allow you to control each individual fixture's
traits with a standard DMX 512 controller such as the
Elation Show Designer™ or the Elation
®
pages 14-16 for the DMX modes & traits.
2. To run your fixture in DMX mode, select your desired channel
mode and then set your desired DMX address following the
directions on page 8, and the set-up specifications that come
with your DMX controller.
3. Plug in the fixture via the XLR connections to any standard DMX
controller.
4. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
Inno Color Beam 12
Master-Slave Configuration:
to 16 units together and operate without a controller. The units will be
sound activated. In Master-Slave operation one unit will act as the con-
trolling unit and the others will react to the controlling units programs.
Any unit can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. Set the Master unit to your desired operating mode.
3. On the slave units tap the MENU button until "Slave Mode" is dis-
played, and Press ENTER. Choose either "Slave 1" or "Slave 2"
and press ENTER. See page 9 for more info.
4. The slave units will now follow the Master unit.
American DJ Supply - www.americandj.com - Inno Color Beam 12 User Manual Page 13
© ®
Universal DMX Control
This function allows you to use a Elation
DMX Operator.™ See
®
Master-Slave Configuration
This function will allow you to link up
Inno Color Beam 12
Channel Value
®
1 0 - 255
2 0 - 255
3
0 - 7
8 - 15
16 - 131
132 - 139
140 - 181
182 - 189
190 - 231
232 - 239
240 - 247
248 - 255
4
0 - 255
5
0 - 255
6
0 - 255
7
0 - 255
8
0 - 255
9
0 - 69
70 - 79
80 - 89
90 - 199
200 - 209
210 - 239
240 - 255
American DJ Supply - www.americandj.com - Inno Color Beam 12 User Manual Page 14
© ®
9 Channel Mode
Function
PAN 0° - 540°
TILT 0° - 270°
SHUTTER/STROBING
BLACKOUT
OPEN
STROBING SLOW - FAST
OPEN
SLOW OPEN - FAST CLOSE
OPEN
SLOW CLOSE - FAST OPEN
OPEN
RANDOM STROBE
OPEN
RED
0% - 100%
GREEN
0% - 100%
BLUE
0% - 100%
WHITE
0% - 100%

MASTER DIMMER

0% - 100%
SPECIAL FUNCTIONS
NO FUNCTION
ENABLE BLACKOUT WHILE PAN OR
TILT MOVEMENT
DISABLE BLACKOUT WHILE PAN OR
TILT MOVEMENT
NO FUNCTION
RESET
NO FUNCTION
SOUND ACTIVE