Advertisement

Quick Links

InnoColor
Beam12
User Instructions
8/12
Inno Color Beam 12
Unpacking:
Thank you for purchasing the Inno Color Beam 12 by
American DJ
. Every Inno Color Beam 12 has been thoroughly tested
®
and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during ship-
ping. If the carton appears to be damaged, carefully inspect your fix-
ture for any damage and be sure all accessories necessary to operate
the unit has arrived intact. In the case damage has been found or parts
are missing, please contact our toll free customer support number for
further instructions. Do not return this unit to your dealer without first
contacting customer support.
Introduction:
The Inno Color Beam 12 is part of American DJ's con-
tinuing pursuit for creating high quality affordable intelligent fixtures.
The Inno Color Beam 12 is a compact, high performance, DMX intel-
ligent, moving head, LED fixture. This fixture is a great piece for retail
stores, displays, mood, architectural, interior and exterior decoration,
and clubs. This unit can be used as a stand alone, or in a Master/Slave
configuration. The unit can also be controlled via DMX controller.
Customer Support:
American DJ
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ
.
®
PLEASE recycle the shipping carton when ever possible.
American DJ Supply
- www.americandj.com - Inno Color Beam 12 User Manual Page 2
©
®
Introduction
provides a toll free customer sup-
®

Advertisement

Table of Contents
loading

Summary of Contents for American DJ Inno Color Beam 12

  • Page 1 The Inno Color Beam 12 is part of American DJ’s con- tinuing pursuit for creating high quality affordable intelligent fixtures. The Inno Color Beam 12 is a compact, high performance, DMX intel- ligent, moving head, LED fixture. This fixture is a great piece for retail stores, displays, mood, architectural, interior and exterior decoration, and clubs.
  • Page 2: General Instructions

    Warranty Registration • Power-supply cords should be routed so that they are not likely to The Inno Color Beam 12 carries a 3 year (1095 days) limited warranty. be walked on or pinched by items placed upon or against them, Please fill out the enclosed warranty card to validate your purchase paying particular attention to the point they exit from the unit.
  • Page 3: Power Supply

    Figure 4 and PIN 3 (DMX +) of the last fixture. Inno Color Beam 12 can be either a 9 Channel or 16 Channel DMX unit. 5-Pin XLR DMX Connectors. The DMX address is set on the rear panel of the Inno Color Beam 12.
  • Page 4 1. Press the MENU button until “SHND” is displayed, press ENTER. American DJ Supply - www.americandj.com - Inno Color Beam 12 User Manual Page 7 American DJ Supply - www.americandj.com - Inno Color Beam 12 User Manual Page 8 ©...
  • Page 5 DMX set up. If power is applied and this mode is set, the American DJ Supply - www.americandj.com - Inno Color Beam 12 User Manual Page 9 American DJ Supply - www.americandj.com - Inno Color Beam 12 User Manual Page 10 ©...
  • Page 6 2. The fixture will now reset, 2. The fixture will now run a self test. American DJ Supply - www.americandj.com - Inno Color Beam 12 User Manual Page 11 American DJ Supply - www.americandj.com - Inno Color Beam 12 User Manual Page 12 ©...
  • Page 7: Master Dimmer

    A DMX controller allows you to create unique 0 - 255 TILT 0° - 270° programs tailored to your individual needs. The Inno Color Beam 12 SHUTTER/STROBING has 2 DMX channel modes; a 9 Channel Mode & 16 Channel Mode.
  • Page 8 SOUND ACTIVE MASTER DIMMER 0 - 255 0% - 100% American DJ Supply - www.americandj.com - Inno Color Beam 12 User Manual Page 16 American DJ Supply - www.americandj.com - Inno Color Beam 12 User Manual Page 15 © ®...
  • Page 9: Photometric Chart

    If problems are not resolved; Contact American DJ® for service. 1-800-322-6337 American DJ Supply - www.americandj.com - Inno Color Beam 12 User Manual Page 17 American DJ Supply - www.americandj.com - Inno Color Beam 12 User Manual Page 18 ©...
  • Page 10: Warranty

    Beam Angle: 15 Degrees back the product. Contact American DJ, Inc. Service Department at 800-322-6337. Send the product only to the American DJ, Inc. factory. All shipping charges must be pre-paid. If the requested repairs or Fuse: 7Amp service (including parts replacement) are within the terms of this warranty, American DJ, Inc. will pay return shipping charges only to a designated point within the United States.

Table of Contents