Milwaukee PH55 Starter Manual

BATTERY REPLACEMENT:

Units are supplied with BEPS (Battery Error Pre-venting
System) which avoids any erroneous reading due to low
battery level, by switching the meter off. To replace the
batteries unscrew the battery compartment cap and replace all
three 1.5V batteries while paying attention to their polarity.
PH55 & PH56 WATERPROOF
Make sure the gasket is in place before screwing back the cap.
METER
Batteries should only be replaced in a nonhazardous area using
STARTER MANUAL
the battery type specified in this instruction manual.

WARRANTY:

This meter (base unit) is warranted from all defects in
materials and manufacturing for a period of two years.
The electrode (probe end) is warranted for a period of 6
months.
During this period, the required repair or replacement of parts,
where the damage is not due to negligence or erroneous
operation by the user, will be effected free of charge.

WARRANTY REGISTRATION:

Please go to our web site and register your unit at
http://www.milwaukeeinstruments.com/registration.html
__________________________________________________
FOR A MUCH MORE DETAILED
OPERATORS MANUAL
GO TO OUR WEB SITE / MANUALS SECTION
AT THE FOLLOWING ADDRESS
www.milwaukeeinstruments.com
_______________________________________
Milwaukee Instruments
2950 Business Park Drive
Rocky Mount, NC 27804
Phone # 242-443-3630