Milwaukee PRO MW801 User Manual

OPTIONAL ACCESSORIES
M10007B pH7.01 buffer solution, 20 mL sachet (25 pcs)
M10004B pH4.01 buffer solution, 20 mL sachet (25 pcs)
M10010B pH10.01 buffer solution, 20 mL sachet (25 pcs)
1413 µS/cm calibration solution, 20 mL sachet
M10031B
(25 pcs)
1382 ppm calibration solution, 20 mL sachet
M10032B
(25 pcs)
1500 ppm calibration solution, 20 mL sachet
M10442B
(25 pcs)
MA9015 Electrode storage solution, 230 mL bottle
SE600 pH/EC/TDS spare probe with 1m cable
SPECIFICATIONS
MW801
pH
0.0 to 14.0 pH
Range EC 0 to 1990 µS/cm
TDS 0 to 1990 ppm
pH 0.1 pH
Resolution EC 10 µS/cm
TDS 10 ppm
pH ±0.2 pH
Accuracy EC 2 % FS
TDS 2 % FS
TDS Factor 0.5
EC / TDS
Temperature Automatic
Compensation
Calibration Manual, 1-point
Probe SE600 combination probe
Operating
0 to 50 °C; 95 % RH max.
Temperature
Battery Type
Battery Life approx. 150 hours of use
Dimensions 143 x 80 x 32 mm
Weight 220 g (meter with battery)
CERTIFICATION
Milwaukee Instruments conform to the
CE European Directives.
Disposal of Electrical & Electronic Equipment.
Do not treat this product as household waste. Hand
it over to the appropriate collection point for the
recycling of electrical and electronic equipment.
Disposal of waste batteries. This product
contains batteries. Do not dispose of them with
other household waste. Hand them over to the appropriate
collection point for recycling.
Please note: proper product and battery disposal
prevents potential negative consequences for human
health and the environment. For detailed information,
contact your local household waste disposal service or
go to www.milwaukeeinstruments.com (USA & CAN) or
www.milwaukeeinstruments.eu.
RECOMMENDATION
MW802
Before using this product, make sure it is entirely suitable for
0.00 to 14.00 pH
your specific application and for the environment in which it is
0.00 to 6.00 mS/cm
used. Any modification introduced by the user to the supplied
0 to 4000 ppm
equipment may compromise the meter' s performance. For
your and the meter' s safety do not use or store the meter
0.10 pH
in hazardous environment. To avoid damage or burn, do not
0.01 mS/cm
perform any measurement in microwave ovens.
10 ppm
WARRANTY
±0.20 pH
2 % FS
These instruments are warranted against defects in materials
2 % FS
and manufacturing for a period of 2 years from the date of
0.68
purchase. Probe is warranted for 6 months. This warranty
is limited to repair or free of charge replacement if the
instrument cannot be repaired. Damage due to accidents,
misuse, tampering or lack of prescribed maintenance is not
covered by warranty. If service is required, contact your local
Milwaukee Instruments Technical Service. If the repair is not
covered by the warranty, you will be notified of the charges
incurred. When shipping any meter, make sure it is properly
packaged for complete protection.
1 x 9 V
ISTMW802 07/22
USER MANUAL
MW801, MW802
PRO Portable
pH/EC/TDS Meters
milwaukeeinstruments.com (USA & CAN)
milwaukeeinstruments.eu
SATISFACTION
GUARANTEED