Using The At-Vp504E Fxs; Before You Begin - Allied Telesis AT-VP504E FXS User Manual

1

Before you Begin

AT-VP504E FXS

Using the AT-VP504E FXS

Thank you for purchasing the AT-VP504E FXS from Allied Telesyn.
This manual illustrates some of the various call processes the
AT-VP504E FXS supports. It also describes how to make and receive
calls, as well as how to use the services the AT-VP504E FXS offers.
This manual assumes that:
your AT-VP504E FXS has been properly set up by your
system administrator
If you need to install and configure the AT-VP504E FXS
yourself, please refer to the Administration Manual provided
with your AT-VP504E FXS or contact your system
administrator.
the IP Communication Server has been properly installed
1
and set up
If you need to install the IP Communication Server yourself,
please refer to the IP Communication Server Administration
Manual provided with your package.
Related Documentation
In addition to this Manual, each document set of the AT-VP504E FXS
includes the following:
IP Communication Server Manual
This manual explains how to install and configure the IP
Communication Server, which is a set of software tools that
helps manage a network of APA communication units and
other SIP devices. It is intended for a network administrator.
The manual is not printed – it is located on the Installation CD
provided with your AT-VP504E FXS.
Administration Manual
This manual explains how to install and set up the various
AT-VP504E FXS parameters. It is intended for a network
administrator. The manual is not printed – it is located on the
Installation CD provided with your AT-VP504E FXS.
1. Valid only if you have purchased the IP Communication Server.
1
1