Making Calls; Complete Dialing Sequence; Dialing A Telephone Number Or A Numerical Alias - Allied Telesis AT-VP504E FXS User Manual

Chapter 1 - Using the AT-VP504E FXS

Making Calls

Complete Dial-
ing Sequence
Dialing a Tele-
phone Number
or a Numerical
Alias
AT-VP504E FXS
Users that have telephones or faxes connected to an AT-VP504E FXS
will dial as if they were on a standard telephony system.
There are three ways to indicate the dialed number sequence is
complete and the AT-VP504E FXS can dial the number:
your administrator has set up the dialing process so that
you must end your telephone number with a particular
character to indicate it is complete, e.g. a "#".
your administrator has set up the dialing process with a
timer. This timer checks the dialing process and, when no
further digits have been dialed for 4 seconds, it assumes
the number is complete and dials it.
your administrator has set up the AT-VP504E FXS so it
knows exactly how many digits it must collect before it
places the call. It finds the number of digits to collect by
looking at the first few numbers dialed. For example: a
telephone number beginning by 1 should be followed by
10 more digits in North America.
Consult your administrator to determine which dialing process is
defined.
This section assumes that the AT-VP504E FXS is configured to do
SCN emulation. The AT-VP504E FXS could be configured to do any
other kind of emulation, thus its users would simply have to dial as if
they were using their old system.
To dial a Standard Call:
Dial the telephone number as if you were using a standard
1.
telephone, with country code and Area Code when required.
Examples:
829-8749
1-514-570-1234
A Standard Call uses the server to contact the remote dialed
user. The server takes the decision as to redirect the call on
the SCN or to keep it on the network. Keeping the call on the
network takes precedence over redirecting it on the SCN. If
User's Manual (SIP/MGCP Version)
7