Fiber Optic Cable Specifications; Optional Transceiver Cable Specifications - Allied Telesis AT-9408LC/SP Installation Manual

Fiber Optic Cable
Specifications
Optional
Transceiver
Cable
Specifications
Note
The speed of a 10/100/1000Base-T twisted pair port on the switch
must be set to Auto -Negotiation, the default setting, if the port is to
operate at 1000 Mbps. A 10/100/1000Base-T twisted pair port
cannot be manually set to 1000 Mbps.
Table 10 lists the fiber optic cable specifications for ports 1 to 8 on the
AT-9408LC/SP Switch. For optical specifications, refer to "AT-9408LC/SP
Switch 1000Base-SX Port Specifications" on page 80.
Table 10. Fiber Optic Cabling and Distances
Cable Type
62.5/125 µm (core/cladding)
multimode fiber optic cable
50/125 µm multimode fiber optic
cable
The cable specifications for the optional GBIC, SFP, and XFP transceivers
can be found in the installation guide shipped with the transceiver.
AT-9400 Series Gigabit Ethernet Switches Installation Guide
Maximum Operating
Distance
275m
550m
49