System LEDs
The system LEDs on the front panel display general status information, as
described in Table 6.
LED
State
FAULT or
Off
FLT
Solid
Red
Flashing
Red
MASTER
Off
or MSTR
Green
RPS
Off
Green
POWER
Off
or PWR
Green
AT-9400 Series Gigabit Ethernet Switches Installation Guide
Table 6 System LEDs
Description
Normal operation.
The switch or management software has
malfunctioned. (Refer to Chapter 3,
"Troubleshooting" on page 65 for instructions
on how to troubleshoot a problem.)
The switch is saving its configuration or is
downloading a new version of the AT-S63
Management Software.
The switch has an enhanced stacking status of
slave or unavailable.
The switch has an enhanced stacking status of
master.
No optional redundant power supply is
connected to the switch.
An optional redundant power supply is
physically connected to the switch and may be
powered on or off.
The switch is not receiving power.
The switch is receiving power.
35