Table of Contents
Advertisement
®
®
SMS on a Sun
Solaris
Server Platform
If you are installing a Secondary SMS or Compute Server, skip to
.........................................................................................................................................................................
For Primary SMS installations, the installation program begins to initialize the database.
16
This process will take several minutes.
For Primary SMS installations, a master key is generated and displayed in the lower half of
the SMS Setup screen. The purpose of the master key is to protect the root certificate used
to authenticate communication between the SMS and the Brick devices that it manages.
Write the master key down and keep it in a secure place. You will need the key to recover
if you should forget the Administrator password and become locked out of the SMS.
.........................................................................................................................................................................
Press
17
[Enter]
If you are installing a Primary SMS, the installation program prompts you to
Result:
create an SMS Administator ID.
This is the Admin ID that you or another administrator uses to log into the SMS.
A valid Admin ID contains a maximum of 16 characters. Keep a record of the Admin
ID in a secure place. You will need this ID to log into the SMS after the installation is
completed.
.........................................................................................................................................................................
Enter the Admin ID and press
18
The installation program prompts you to enter a password.
Result:
A valid password contains up to 42 characters. The password is case-sensitive. Keep a
record of the password, which will be required to log into the SMS after the
installation is completed.
.........................................................................................................................................................................
Enter the password and press
19
.
[Enter]
The installation program displays a message indicating that the initial setup is
Result:
complete.
.........................................................................................................................................................................
Important! In some cases, even if the installation is successfully completed, you may
20
receive the following message:
This program might not have installed correctly
followed by a series of options. If this occurs, choose
This program installed correctly
Press
to continue with the installation.
[Enter]
...................................................................
56
to continue with the installation.
[Enter]
[Enter]
.
, then enter the password a second time and press
to proceed with the installation.
Step
20.
Advertisement
Table of Contents
