Advertisement
Solid Surface Mount
The mounting kit can be used to attach the AP to a solid, flat, indoor surface
such as a wall, shelf, and ceilings.
F
IGURE
Orient the cradle with its flat side against the mounting surface. If attaching
the cradle to a wall, orient it so that the notched end is positioned at the top.
Secure the cradle to the solid surface using four #6 screws (not included) or
equivalent. Use the round cradle holes (A) for solid surfaces. If attaching the
cradle to drywall, use the wide cradle holes (B) and the appropriate wall
anchors (not included) as shown above.
C
—Do not use screws to attach the mounting cradle to a
AUTION
suspended ceiling or other structurally weak surface. For suspended
ceilings, use the T-rail clips as described on
2 Attaching the Cradle to a Solid Surface
A
B
page
4.
The AP60/61 Mounting Kit Installation Notes
3
Advertisement
