Sfp Module (Top, Bottom, Side, And Front Views) - Alcatel-Lucent 1200 User Manual

.........................................................................................................................................................................
Verify that the bale clasp on the front of the SFP module is closed before inserting the SFP
2
module (refer to
Figure 2

SFP Module (Top, Bottom, Side, and Front Views)

.........................................................................................................................................................................
3
CAUTION
Possible Equipment Damage
Do not remove the dust plugs from the optical bore of the SFP module or the dust caps
from the fiber-optic cable until you are ready to connect the cable. The plugs and caps
protect the SFP module optical ports and cable connectors from contamination.
Align the SFP module in front of the slot opening with its connection pins in the upward
position (the SFP module label will face in a downward position), and slide the SFP
To Change the SFP Module for a Model 1200 Brick Device Gigabit Only Port
Figure 2, "SFP Module (Top, Bottom, Side, and Front Views)" (p.
...................................................................
13)).
13